Asked by: Myrta Mundaiz
home and garden interior decorating

How much does a curtain rod weight?

Last Updated: 19th April, 2021

Divide the weight by the required rod width to get the amount of weight per foot and choose a rod, based on the manufacturer's information, that will accommodate this weight. For example, if the curtains weigh 50 pounds, and the required rod width is 12 feet, the rod must hold just over 4 pounds per foot.

Click to see full answer.

Also to know is, how much does a curtain weigh?

Approximate curtain weight table

3w (1.5w per curtain)
Curtain Drop 150cm 3kg
200cm 3.8kg
250cm 4.6kg
300cm 5.2kg

Similarly, how thick should a curtain rod be? Choose a curtain rod with a diameter of at least 1 inch (2.5 cm). Thin curtain rods tend to look cheap and can bow under the weight of your drapes if they are heavy. When choosing a curtain rod, look for a rod that is at least 1 inch (2.5 cm) thick for good aesthetics and curtain support.

Correspondingly, how much weight can a 5'8 curtain rod hold?

9 lbs per foot and the fluted version only holds 1.5 lbs per foot. This means an 8′ wide window drapery cannot weigh more than 7.2 lbs or 12 lbs.

What is the best way to hang heavy curtains?

How to Hang Heavy Curtains

  1. Measure the width and the height of the window you will hang the curtains over.
  2. Purchase a sturdy curtain rod that can support the weight of your curtains.
  3. Run a stud detector over the wall where you will hang the curtain.
  4. Choose a location for your curtain rod brackets depending on the location of the wall studs.

Related Question Answers

Vilius Machetanz


How heavy is a night curtain?

Curtain Cleaning Weight Estimation Singapore
Width 1 Meter and Below 1-2 Meter
Day Curtain N/A N/A
Night Curtain (Per Pcs) 1.8-2.2KG 2.5-2.8KG
Night Curtain With Lining (Per Pcs) 2.2-2.5KG 2.8-3.5KG
Blackout Curtain (Per Pcs) 3.5-4.5KG 4-6KG

Clelia Sered


How heavy are blackout curtains?

100% Blackout Curtains for Living Room Extra Wide Blackout Curtains for Patio Doors Double Layer… Blackout Curtain Black Nickel Grommet Top Energy Saving Thermal Insulated 120 Inch…

Technical Details.
Item Weight 3.97 pounds
Assembled Width 11 inches
Assembled Length 15 inches
Weight 5.28 Pounds

Isra Vior


How do you calculate drapery weight?

To compute the curtain weight, add the Velour fabric weight to the liner weight to get a sum of 33 ounces per square yard. Divide by 9 to get 3.67 ounces per square foot. The height of the curtain is 20 feet, add 1 foot for top hem and bottom chain pocket and then multiply 21 x 3.67 = 77.07 ounces.

Leann Zeifert


How do you weigh down curtains?

You can hand sew a couple of stitches around the chain at either end of the hem to prevent it from sliding around if you lift the drape up. Because chain weights provide weighting along the entire bottom of the curtain, this is often considered the best way to weight curtains.

Margo Brands


What are medium weight curtains?

Medium Weight Curtains:
Medium weight curtains tend to be 100% cotton, polyester or a poly mix fabric. They can be lined or blackout lined but they don't have any interlining. They can be full length and they can cover a wide window.

Dexter Willinghofer


How do curtain weights work?

It's generally a good idea to use drapery weights in at least the two bottom corners so the curtains hang straighter. You can also use them in between the corners, especially for wider drapes. When your weights are attached, fold the hem back up and finish making the curtains.

Raouia Curros


How much does a shower curtain weigh?

With a medium weight of 120 grams per square meter, the shower curtain offers both durability and supple softness for your bathroom.

Dunja Olloqui


How can I hang heavy curtains without nails?

Take one of your 3M Command hooks, take off the paper backing on the adhesive strips, and line the hook up on the wall using the pencil mark for guidance. Press it on the surface well, holding for at least 30 seconds, then let it be for at least a half hour. Repeat the same for the other side.

Zoumana Dube


How do you keep curtain rods from bowing?

You can secure the rod from above by using a line of some sort--steel wire or cloth, depending on your decor. Install a bracket or hook above the center of the rod, on the wall or on the ceiling, and connect it to the rod. Tension the line enough so that the line supports much of the weight of the curtains.

Zulaica Saunier


How do you reinforce a curtain rod bracket?

Simply place the Kwik-Hang brackets on the top of your window trim, tap them in, hang your curtains and move on to your next task. No screws, drills, holes or damage. Kwik-Hang brackets hold up to 20 pounds, and you can reinforce your curtain rod with a Kwik-Hang center bracket for added support.

Lucretia Valten


How do you fix a sagging curtain rod?

How to Fix a Sagging Curtain Rod
  1. 1 – Move Your Support Brackets.
  2. 2 – Add Additional Support Brackets.
  3. 3 – Insert a Support Rod.
  4. 4 – Use a Lighter Fabric.
  5. 5 – Shorten the Curtain.
  6. 6 – Protect the Curtain with a Barrier.
  7. 7 – Purchase a Heavier Duty Curtain Rod.
  8. 8 – Replace the Support Brackets.

Curt Moncalian


Hisako Sutre


What are the best curtain rods?

Here are the best curtain rods you can buy:
  • Best curtain rod overall: Decopolitan End Cap Single Curtain Rod Set.
  • Best curtain rod for renters: RoomDividersNow Tension Rod.
  • Best curtain rod for traverse draw heavy drapes: Rod Desyne Heavy Duty Adjustable Traverse Rod.

Caiqin Matsko


Do curtain rods need to be hang on studs?

Wall studs are usually placed at 16 or 24 inches on-center. If no wall studs are available, install wall anchors in the drywall. Screw the curtain rod brackets into the wall anchors.

Saad Guerricagoitia


Do I need wall anchors for curtain rods?

You'll need to use plastic wall anchors to provide proper support if you're installing in drywall. Fasten the brackets to the walls using your drill or screwdriver. Having a hand tool ready often makes this job easier since it can be hard to use a larger electric drill when mounting curtain rod hardware to the wall.

Tao Meckel


How do you hang curtains on a extra wide window?

Wide curtains require support brackets across the rod, often as close as 24 inches apart, and the curtains must be attached to the rod in such a way that they bypass these brackets. Typically this type of rod has brackets that attach to the top of the rod, and the curtains attach to runners along the bottom of the rod.

Ancuta Ziegelmann


What are the different ways to hang sheer curtains?

Learn more about how to choose the right curtain rod for your room.
  1. Layer Sheers With Thicker Curtains.
  2. Hang Multiple Panels to Add Depth and Color.
  3. Create a Window Scarf.
  4. Frame Your Windows and Display a Centerpiece.
  5. Beautify Your Bedroom.
  6. Enhance a Doorway or Entryway.
  7. Combine With String Lights to Illuminate Your Windows.

Anjara Hayaletdinov


How do you hang curtains on thin walls?

The Easy Way to Hang Curtains on Plaster Walls
  1. Step 1: Mark the Spot for the Bracket.
  2. Step 2: Drill Top Hole.
  3. Step 3: Add Screw.
  4. Step 3: Insert a Molly Bolt Into the Hole.
  5. Step 3.5: Add Screw.
  6. Step 4: Dry Fit Bracket and Mark Second Hole Hole.
  7. Step 5: Drill Second Hole and Add Screw.
  8. Step 6: Repeat for Other Brackets.