Asked by: Carrol Narasimban
automotive auto parts

How do you replace the throttle cable on a Craftsman riding lawn mower?

Last Updated: 3rd September, 2021

33
VIDEO

Click to see full answer.

Then, how do you adjust the throttle on a Craftsman riding lawn mower?

Loosen or tighten the throttle cable as needed until it controls the throttle correctly in response to the adjustment of the throttle lever. To adjust the cable, loosen the adjustment screw that holds it in place, adjust the position of the cable and tighten the screw again to hold the adjustment.

Subsequently, question is, how do you adjust the throttle on a Briggs and Stratton lawn mower? How to Adjust the Idle on a Briggs & Stratton Lawn Mower

  1. Loosen the set screw in the center of the air filter with a flathead screwdriver.
  2. Tighten the idle adjustment screw, found on the side of the carburetor, by turning it clockwise just to the point where you feel it lightly touching the seat of the carburetor.

Also to know, how do I fix the throttle cable on my lawn mower?

How to Replace & Adjust the Throttle Cable on a Lawnmower

  1. Remove the cable housings using a pair of pliers. The housings will swivel off the base and slide down the cable.
  2. Thread the cable wire through the housing.
  3. Slide the cable through the housing and then into the handle unit to attach it to the throttle handle.
  4. Test the tension by replacing the throttle.

How do you adjust the throttle cable on a Honda lawn mower?

How to Adjust Throttle Cables on a Honda Lawn Mower

  1. Turn the lawn mower off.
  2. Slide the throttle lever into the "choke" position.
  3. Locate the Phillips-head screw that holds the throttle lever to the engine bracket.
  4. Grasp the throttle cable and pull it toward the lawn mower handle until it is tight.
  5. Attach the spark plug wire back to the spark plug.

Related Question Answers

Margert Isaurralde

Pundit

How do you adjust the throttle on a riding lawn mower?

Set the throttle to fast and start the mower engine. Turn the high speed screw first clockwise until the engine slows, then counterclockwise until it slows. Locate the center point where the engine idles best. Move the throttle from slow to fast then back to slow to test the adjustment.

Vasilisa Dirrichs

Pundit

What is choke and throttle?

The one that controls the air flow is called the choke valve and the other is throttle valve which is connected to accelerator of the bike. When you operate the choke valve it closes the air inflow to the carburetor and then helps in creating rich fuel mixture ( consists of heavy percentage of fuel for easy burning) .

Diabel Midon

Pundit

How do you adjust a Briggs and Stratton carburetor?

How to Set a Briggs & Stratton Carburetor
  1. Turn off the engine and allow it ample time to cool fully.
  2. Loosen the large set screw on top of the air filter with a flathead screwdriver and remove the air filter from the carburetor.
  3. Locate the idle adjustment screw on the side of the carburetor.

Kaitlin Grammelspacher

Teacher

How does a small engine throttle work?

For a gasoline engine, the throttle most commonly regulates the amount of air and fuel allowed to enter the engine. Recently, for a GDI engine, the throttle regulates the amount of air allowed to enter the engine. The throttle of a diesel, when present, regulates the air flow into the engine.

Carlotta Pechnikov

Teacher

Where is the choke on a riding lawn mower?

Pull the throttle into the choke position.
It may be next to the seat on the left side. Many throttles are identifiable because they indicate speed by a picture of a rabbit and turtle. Move the throttle lever so it engages the choke.

Faik Cossmann

Reviewer

How do you reattach a throttle cable?

Push the new cable through the firewall and into the engine compartment. Step 2: Hook the new cable up to the accelerator pedal. Slide the new cable through the slotted hole in the accelerator pedal. Step 3: Reconnect the throttle cable to the retaining bracket.

Yuemei Usategui

Reviewer

What does the throttle do on a lawn mower?

In the engine of your lawnmower, you need to have a way of controlling the speed of the engine, and that is what a throttle does. It is a component that is very small in size, yet handles the governor and regulates the functioning of all the engine parts when you are using the mower.

Ildefons Andiconaveitia

Reviewer

How does a throttle cable work?

An accelerator cable, sometimes called throttle cable, is a metal braided cable that serves as a mechanical link between the gas pedal and the engine's throttle plate. When the gas pedal is pressed, the cable is pulled and opens the throttle.

D'Assis Henik

Beginner

Why does my lawn mower not throttle?

The reason your equipment has no adjustable throttle is because that is how the equipment manufacturer asked the engine manufacturer to make the engines for them. A big part of the engine features are the equipment manufacturer's doing.