Asked by: Viki Borkowski
hobbies and interests woodworking

How do you make wood smooth and shiny?

Last Updated: 11th April, 2020

13
DIY Shiny Wood Finish
  1. Sand the surface of the wood with 600-grit sand papertoremove any imperfections and to give the polyurethane agrippingsurface.
  2. Wipe the surface clean with a rag dampened withmineralspirits.
  3. Brush clear pore filler onto the wood surface withapaint sponge.

Click to see full answer.

Likewise, how do I get a high gloss finish on wood?

  1. Sand the wood with 150-grit sandpaper.
  2. Wipe off the sanding dust using a damp towel or rag.
  3. Prime the wood with a stain-blocking wood primer.
  4. Use a foam brush to paint the wood surface with ahigh-gloss,oil-based paint.
  5. Apply a second coat of high-gloss, oil-based paint afterthefirst coat dries.

Similarly, should I sand between coats of high gloss paint? I also prefer multiple coats of flatpaintas opposed to one goopy, thick coat of highergloss orenamel paint. Apply multiple coats,working in thedirection of the wood grain, allowing eachcoat to dry asrecommended by instructions on thepaint can. Sandwith fine sandpaper betweencoats after theydry.

Correspondingly, how do I get a smooth finish with polyurethane?

Polyurethane Finish Tip#1: Start With aThickCoating That's not to say you should apply each coatthickly.Four regular coats of urethane applied one over the otheris a goodstarting point. Sand lightly with 240-grit sandpaperbetween coats,then let the last coat dry for at least24hours.

Can you sand high gloss paint?

Before you begin paintingwithhigh-gloss latex, you must prepareyoursurfaces carefully. Scrape any loose paint or wallpaperandsand down rough spots using afine-gritsandpaper.

Related Question Answers

Heorhiy Jurico

Professional

How do you paint wood without brush marks?

Painting Tip #4- Painting techniques that helpeliminatebrush strokes
  1. Don't press too hard on the brush.
  2. Paint in the details and then smooth over.
  3. Going back over semi dry paint will cause ripples.
  4. You want to apply a thin coat, but don't“stretch”the paint on the brush.
  5. Always paint in one direction.

Heliberto Orioli

Professional

How do you finish glass on wood?

How to Get a Glass Finish on Wood
  1. Place the wood onto a drop cloth to collect any debris fromthefinishing process.
  2. Sand away any scratches on the wood with amedium-gritsandpaper.
  3. Spray a layer of clearcoat paint onto the wood, coveringthesurface evenly with a light coating.

Fayza Kwosnie

Explainer

What is high gloss polyurethane?

High gloss polyurethane is anexterior/interior,tough, flexible, high-performance,heavy-duty, two-componentfinish that dries to a very shiny surface.Semi-glosspolyurethane dries to a sheen that is betweengloss andflat. Semi-gloss polyurethane can be foundon woodwork,furniture, doors, floors and cabinets.

Montes Mollhauer

Explainer

How do you make painted surfaces smooth?

Instructions
  1. Sand your furniture piece smooth.
  2. Vacuum all the dust from the furniture piece.
  3. Wipe off any remaining dust with a tack cloth.
  4. Fill your paint sprayer with paint.
  5. Spray the first coat on your furniture.
  6. After the first coat is dry, lightly sand the entiresurfacewith an ultra fine grit sanding block.

Andy Holzem

Explainer

Can you use gloss paint on furniture?

For a hard-wearing finish, use oil-basedorwater-based gloss or eggshell. These can be usedonwood and on metal (the latter providing you havepreparedand primed well). You can also go for specialistmetallicpaints.

Shyam Pipo

Pundit

Can you polish painted wood?

Most painted wood furniture doesn'trequirecleaning or polishing beyond wipe-downs with a damprag.Then, gently rub the wax into the surface of yourpaintedwood furniture, allow it to dry, and then buffwith asoft cloth or buffing cloth.

Aamir Garrard

Pundit

What happens if you don't sand between coats of polyurethane?

Q: What will happen to a wood floor ifyoudo not sand between coats of polyurethane? A:Nothing,provided you apply each coat of finish withinareasonable amount of time. If you get dust nibs orbrushmarks in the finish, sanding will smooth them, and yournextcoat will look better if you work on asmoothsurface.

Dabid Pang

Pundit

How do you remove brush marks from polyurethane?

How to Remove Brush Marks From aPolyurethaneFinish
  1. Sand down the brush marks lightly with thefine-gritsandpaper.
  2. Brush the sanded area off with a soft cloth to remove alltracesof dirt and grit from the sanding.
  3. Apply the polyurethane finish lightly to the brush, makingsureto wipe off any extra.

Ilenuta Cumming

Pundit

How do you polish the final coat of polyurethane?

Put on the polish
Apply only one thin coat. Then, remove anydustnibs with 1,500-grit sandpaper or a piece of brown paperbag.Finally, using a soft cotton rag or polishing pad, buff thefinishto a high shine using automotive paste wax, photo below,which hasfine abrasives that polish the finishevenfurther.

Kimiko Sander

Pundit

Can I use a roller to apply polyurethane?

Polyurethane is easily applied with a paintbrushor roller and dries quickly. Applying thematerialwith a roller eliminates brush strokes and linesandprevents over-applying the material. Yes, you canusea paint roller to apply polyurethane.

Hryhoriy Eichenseer

Teacher

Can you apply a second coat of polyurethane without sanding?

Issue sanding between coatsofpolyurethane. Apply a THIN coat ofMinwax®Fast-Drying Polyurethane using a high-qualitynatural orfoam brush. Let dry 4-6 hours. Then lightly sand entiresurfacewith fine sandpaper (220 grit) to ensure an even finish andproperadhesion.

Timoteo Negle

Teacher

Do you sand the final coat of Polycrylic?

FINISH APPEARS MILKY IN CAN BUT DRIESCRYSTALCLEAR. Apply a thin coat of Polycrylic™Finishwith a high-quality synthetic bristle brush. Let dryat least 2hours then sand with very fine sandpaper (220grit) toensure an even finish and proper adhesion ofadditionalcoats. Do not use steel wool.

Georges Daams

Teacher

How do you smooth wood without sandpaper?

With that in mind, here are three ways to finishwoodprojects (meaning to get them nice and smooth) that don'trequiresandpaper.
  1. Scraping. This can be done with a knife held at 90 degreestothe wood, with a cabinet scraper or even a piece of broken glassina pinch.
  2. Burnishing. Rubbing the wood.
  3. Sanding.

Rabih Grasset

Teacher

Can I use a foam brush to apply polyurethane?

Apply polyurethane using a bristle orfoambrush about 2″ wide. Foam works wellandeliminates the chore of cleaning, because the brushesarecheap and thus disposable. You can apply the first coatfullstrength or thinned up to half with paint thinner, making,ineffect, a wiping varnish. (Use a separate canorjar.)

Landelina Petrovich

Reviewer

How do you apply polyurethane without bubbles?

To prevent air bubbles from occurring at all, followthesetips.
  1. Stir the Can Prior to Use and Take Your Time. Resistthetemptation to shake the polyurethane prior to use.
  2. Use a Natural Bristle Brush. There are many different typesofbrushes that can be used to apply finish to wood.
  3. Avoid Creating Foam.
  4. Tip-off Finish.

Predrag Vizcaino

Reviewer

How do you polish wood naturally?

Instructions
  1. Mix the ingredients: You'll need 2 parts vinegar, 2 partsoliveoil, and 1 part lemon juice.
  2. Ready the cloth: Lightly dip the corner of one of themicrofibercloths into the polish.
  3. Apply to your wood surfaces: Going with the grain, rubthemixture into the wood.

Rosemberg Arguisuelas

Reviewer

What is the best wood cleaner?

The Best Furniture Polishes to Make EverySurfaceShine
  • 1 Best Oil: Pledge Restore & Shine. Pledge.
  • 2 Best Aerosol: Guardsman Anytime Clean & Polish.
  • 3 Best Wax: Howard Feed-N-Wax Wood Polish.
  • 4 Best Wipe: Weiman Furniture Wipes.
  • 5 Best Duster: Twinkle Dust and Shine Cloth.
  • 6 Best Scratch Solution: Weiman Repair Kit.

Nataliia Paisley

Reviewer

Is pledge bad for Wood?

Small particles of dust may seem harmless, butenoughbuildup can scratch the wood's finish. Stay awayfromPledge and other dust polish, as they contain siliconesthatcan soak into the grain of the wood and damage itforgood.

Abdoul Thutewohl

Supporter

Is coconut oil good for wood?

Coconut oil moisturizes wood and bringsoutits natural colors. Sand the table, wash it with soapy water,let itdry, then use a clean, dry rag to rub on coconut oil.Leaveit for 15 minutes, then buff the table by moving a soft, dryclothin wide circles across it.

Co-Authored By:

ContextResponse Staff Editor

14

11th April, 2020

229

94% of readers found this page helpful.

4/5

Click a star to add your vote

Similar Asks
Trending